The “This device is disabled (Code 22)” error can be caused by a variety of reasons, but the most common are software conflicts and hardware issues. This article will walk you through troubleshooting steps to fix this error on your Windows 10 PC.
The intel wireless bluetooth this device is disabled. (code 22) error can be caused by a variety of factors, but the most common cause is an issue with the hardware or drivers.
RECOMMENDED: To repair Windows problems and improve system performance, go here.
Device Manager has a number of error codes, including error code 22. When a hardware device is deactivated in Device Manager, this message is produced.
The device has most likely been deactivated deliberately, but it is also possible that Windows has been forced to disable the device owing to a shortage of system resources.
Almost usually, the mistake is presented as follows:
This gadget has been turned off. (Section 22)
The “Device Status” section of the device properties contains detailed information regarding Device Manager problem codes.
What causes the error message “Device Disabled (Code 22)”?
The “This device is disabled” issue is also known as error code 22. In Windows 10, a hardware device problem is the most common reason of this error. This issue may appear on your Windows PC if your system resources are depleted and it is unable to operate a certain hardware device.
So, how do you go about resolving this issue? Don’t be concerned. This issue may be easily resolved by following a few troubleshooting steps in Device Manager.
How do I fix the problem “Device Disabled (Code 22)”?
Updated in September 2021:
For your mistake, we now suggest that you use this tool. This program also corrects common computer problems, protects you from file loss, viruses, and hardware failures, and optimizes your PC for optimum performance. With this program, you can rapidly repair your PC issues and prevent others from occurring:
- Step 1: Get the PC Repair & Optimizer Tool (Microsoft Gold Certified for Windows 10, 8, 7, XP, and Vista).
- Step 2: Select “Start Scan” to look for Windows registry issues that may be causing your computer to malfunction.
- Step 3: To correct all problems, click “Repair All.”
Reinstall the device driver if necessary.
- Open the Device Manager application.
- Locate and right-click the device with problem code 22.
- Select Uninstall Device from the drop-down menu.
- Start your computer again. after closing Device Manager.
- Windows will automatically reload the machine driver after restarting.
The device driver must be updated.
- Open the Device Manager application.
- Locate and right-click the target device.
- Select Update driver from the context menu.
- Choose Search for driver software on your machine from the drop-down menu.
- Choose from a list of my computer’s available drivers.
- Next should be selected.
- Choose the device driver for the hardware you wish to install.
- Next should be selected.
- The driver update procedure will start, and you must wait for it to finish.
- Following that, you must restart your computer.
- Check to see whether the error number 22 has vanished after restarting the machine.
The gadget must be manually activated.
- In the search box, type “Device Manager.”
- You’ll be sent to the Device Manager if you choose the first search result.
- In the device list, look for the deactivated device.
- Select Properties from the pop-up menu by right-clicking on the device.
- Toggle over to the Driver tab.
- If the device seems to be disabled, select Enable Device to enable it.
- To save your changes, click OK.
Restart your computer
This gadget has been turned off. A transient issue with the target hardware may potentially be the cause of (Code 22). This is a simple issue to solve: just restart the computer and try again, since restarting the computer usually fixes problems.
It takes just a few seconds to restart your computer, and it has been shown to be an effective remedy. To avoid a fresh issue, make sure you reset your computer properly.
RECOMMENDED: To fix Windows problems and improve system performance, go here.
Most Commonly Asked Questions
- Start the program.
- To start the experiment, go for the Device Manager and click on the first result.
- Expand the category where the device you wish to activate is located.
- Select Activate Device from the context menu when you right-click on the device.
- To confirm, click Yes.
- Change the settings of the device you just installed or uninstall it.
- Revert the driver to the version that existed before to the upgrade.
- To reverse the last modifications you made to the Device Manager, use system restore.
- Reinstall the device drivers if necessary.
Windows no longer provides system resources to the device after it is unplugged, and no applications on your computer may utilize it. A disconnected device generates error code 22 and is displayed by a black arrow in Device Manager or a red x in Windows XP.
- Select the Troubleshooting shortcut at the end of this article or go to Start -> Settings -> Update and Security -> Troubleshooting.
- Choose the kind of troubleshooting you wish to do, then click Run Troubleshooting.
- Run the troubleshooter and respond to the questions that arise.
The windows was not able to enable this device is a message that will show up on Windows 10 when you try to turn on your computer. This article will walk you through the steps of repairing the error.
Frequently Asked Questions
What is a code 22?
How do I enable a device after disabling it?
In order for a device to be enabled again, the user will have to go into their settings and enable it.
How do I fix driver errors in Windows 10?
If you are having problems with your computer, it is likely that you have a driver error. A driver error can occur for many reasons, including system errors or faulty hardware.
Related Tags
- error code 22 resolving failed
- this device is disabled. (code 22) camera
- graphics device driver error code 22
- windows has stopped this device because it has reported problems. (code 43)
- error code 22 motherboard